CDYLQ - 851 1883 KODAK EKTACOLOR PRIME DEVELOPER REPLENISHER/RA-4, A
- MSDS: CDYLQ
- Manufacturer: EASTMAN KODAK COMPANY
- Product Name: 851 1883 KODAK EKTACOLOR PRIME DEVELOPER REPLENISHER/RA-4, A
- National Stock Number: 6750-00D005875
Product Identification
Product ID:851 1883 KODAK EKTACOLOR PRIME DEVELOPER REPLENISHER/RA-4, A
MSDS Date:06/07/1996
FSC:6750
NIIN:00D005875
Kit Part:Y
MSDS Number: CDYLQ
Responsible Party
ROCHESTER, NY 14650
US
Emergency Phone: 716-722-5151
Info Phone: 800- 242-2424
Cage: 19139
Contractor
Telephone: 800-828-6203
Cage: 5K871
Ingredients
WATER
CAS: 7732-18-5
RTECS: ZC0110000
Fraction By Weight: 70-75%
DIETHYLHYDROXYLAMINE
CAS: 3710-84-7
RTECS: NC3500000
Fraction By Weight: 10-15%
ETHANOL, 2,2',2"-NITRILOTRI-; (TRIETHANOLAMINE)
CAS: 102-71-6
RTECS: KL9275000
Fraction By Weight: 10-15%
ACGIH TLV: 5 MG/M3
SUBSTITUTED STILBENE,
CAS: 82640-05-9
Fraction By Weight: 1-5%
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: EXPECTED TO BE LOW HAZARD
FOR RECOMMENDED HANDLING. EYES: NO SPECIFIC HAZARD KNOWN. MAY CAUSE
TRANSIENT IRRITATION. SKIN: LOW HAZARD FOR RECOMMENDED HANDLING.
INGESTION: EXPECTED TO BE A L OW INGESTION HAZARD.
Explanation of Carcinogenicity:NO INGREDIENT OF A CONCENTRATION OF 0.1%
OR GREATER IS LISTED AS A CARCINOGEN OR SUSPECTED CARCINOGEN.
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHALATION-MOVE TO FRESH AIR. TREAT SYMPTOMATICALLY. GET
MEDICAL ATTENTION IF SYMPTOMS PERSISTS. EYES-ANY MATERIAL THAT
CONTACTS THE EYE SHOULD BE WASHED OUT IMMEDIATELY WITH WATER. GET
MEDICAL ATTENT ION IF SYMPTOMS OCCUR. SKIN-WASH WITH SOAP & WATER.
GET MEDCIAL ATTENTION IF SYMPTOMS OCCUR. INGESTED-IF CONSCIOUS,
DRINK 1-2 GLASSES OF WATER. SEEK MEDICAL ATTENTION.
Fire Fighting
Flash Point:>38C-<93C
Extinguishing Media:WATER SPRAY, CARBON DIOXIDE, DRY CHEMICAL, ALCOHOL
FOAM. USE WATER SPRAY TO COOL FIRE EXPOSED CONTAINERS.
Fire Fighting Procedures:SELF-CONTAINED BREATHING APPARATUSWEAR AND
PROTECTIVE CLOTHING. FIRE OR EXCESSIVE HEAT MAY PRODUCE HAZARDOUS
DECOMPOSITION PRODUCTS.
Unusual Fire/Explosion Hazard:CLASSIFIED AS COMBUSTIBLE. MATERIAL
CONTAINS A COMBUSTIBLE SOLVENT THAT MAY ACCUMULATE IN THE CONTAINER
HEADSPACE. ELEVATED TEMPERATURE CAN CAUSE DECOMPOSITION.
Accidental Release
Spill Release Procedures:MAY REQUIRE NEUTRALIZATION. ELIMINATE IGNITION
SOURCES. FLUSH TO SEWER WITH LARGE AMOUNTS OF WATER. OTHERWISE,
ABSORB SPILL WITH VERMICULITE OR OTHER INERT MATERIAL, THEN PLACE
IN A CONTAINER FOR CHEM ICAL WASTE. CLEAN SURFACE THOROUGHLY.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP CONTAINER CLOSED. STORE IN A COOL
PLACE.,
Other Precautions:USE WITH ADEQUATE VENTILATION. WASH THOROUGHLY AFTER
HANDLING.
Exposure Controls
Respiratory Protection:NONE SHOULD BE NEEDED.
Ventilation:GOOD GENERAL VENTILATION (TYPICALLY 10 AIR CHANGES/HR)
SHOULD BE USED. VENTILATION RATES SHOULD BE MATCHED TO CONDITIONS
Protective Gloves:IMPERVIOUS GLOVES SHOULD BE WORN.
Eye Protection:WEAR SAFETY GLASSES WITH SIDE SHIELDS.
Other Protective Equipment:EYE BATH, SAFETY SHOWER, WASHING FACILITIES.
Work Hygienic Practices:IT IS GOOD INDUSTRIAL HYGIENE PRACTICE TO
MINIMIZE EYE CONTACT. WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
KEY1: HCC=F8. THIS IS A THREE PART KIT WITH A WORKING SOLUTION.
WARNING! HEAT SENSITIVE - CAN DECOMPOSE OF HEATED. KEEP OUT OF
REACH OF CHILDREN.
Chemical Properties
HCC:C1
Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:18 MMHG
Vapor Density:0.6 AIR=1
Spec Gravity:1.03
pH:10.8
Solubility in Water:COMPLETE
Appearance and Odor:LIQUID, LIGHT YELLOW, SLIGHT AMINE ODOR.
Percent Volatiles by Volume:70-75
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGNETS.
Stability Condition to Avoid:STABLE; HOWEVER, MATERIAL CAN DECOMPOSE
ABOVE 180C. AVOID TEMPERATURES ABOVE 80C.
Hazardous Decomposition Products:OXIDES OF NITROGEN, CARBON MONOXDE,
CARBON DIOXIDE.
Conditions to Avoid Polymerization:WILL NOT OCCUR.
Disposal
Waste Disposal Methods:DISCHARGE, TREATMENT, OR DISPOSAL MAY BE SUBJECT
TO NATIONAL, STATE, OR LOCAL LAWS. FLUSH TO SEWER WIOTH LARGE
AMOUNTS OF WATER. SINCE EMPTIED CONTAINER RETAIN PRODUCT RESIDUE,
FOLLOW LABEL WARNINGS E VEN AFTER CONTAINER IS EMPTIED.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.